Deeper Flexarm Mount 2.0

Name: Deeper UAB

Name: Deeper UAB

Address: Antakalnio st. 17, 10312 Vilnius, Litauen

Email: arvydas.silva@deeper.eu

Website: https://deeper.eu/

Name: Arvydas Silva

Email: arvydas.silva@deeper.eu

WARNING:
• The Flexy Arm contains metal parts that may have sharp edges. Improper handling can cause cuts or other injuries.
• The maximum load capacity of the Flexy Arm is 20 kg / 44 lb. Exceeding this limit may cause breakage, which can be potentially dangerous to users and may damage the sonar device.
• After use in salt water, rinse the mount with fresh water to prevent corrosion.
• Prolonged exposure to salt water can cause corrosion of the metal parts. Inspect and maintain the product regularly to avoid structural failure.
• The Flexy Arm is designed to bend to a certain degree. Overstretching or forcing it beyond its capacity can cause permanent damage or breakage.
• Check all components for signs of wear, cracks or rust. Replace damaged parts immediately. For spare parts or technical support, please contact Deeper Support at support@deeper.eu.
• When not in use, store the Flexy Arm in a dry, cool place away from direct sunlight to prevent material damage.
NOTE!
• This product is not a toy. It contains small parts and sharp edges that present a risk of choking and injury. Keep out of reach of children.
• This mount has been specifically designed to attach Deeper sonar devices securely to boats. It is not intended for use with sonar devices from other manufacturers or for any other purpose.
• Risk of injury: ensure that no body parts are near the mount when installing it, to avoid trapping.
• If the sonar device falls into the water due to a failure of the Flexy Arm, personal safety takes priority over retrieval. Use the safety strap to avoid such situations.
• In the event of cuts or other injuries caused by the Flexy Arm, clean the wounds immediately and seek medical attention if required.
Installation Safety
• Always check the mounting system to ensure the Flexy Arm is securely attached to the boat and that the safety strap is in use. An insecure attachment can cause the sonar device to fall into the water or result in injury.
• Ensure that the sonar device and the boat are compatible with the Flexy Arm mounting system. Incorrect compatibility can lead to instability.
• When installing, avoid overtightening screws or clamps, as this can cause damage to plastic or metal parts.
• Before setting off, ensure the mount is securely attached to prevent it from coming loose. At higher boat speeds (>5 km/h / 3.1 mph), the Flexy Arm must be removed from the water to prevent the sonar or parts of the Flexy Arm from coming into contact with the water.
During Use
• Sudden or extreme boat movements can put strain on the Flexy Arm. Position the arm so that strain is minimised and proper weight distribution is maintained.
• Avoid the Flexy Arm system coming into contact with other objects (e.g. banks, branches).
• Take care around sharp edges on the metal parts, particularly when adjusting the arm in wet conditions.
• Avoid making adjustments to the Flexy Arm while the boat is in motion, to prevent accidents or damage.